Single Part Machines

Home / Single Part Machines

We JAL Automation & Systems are leading manufacturer and supplier of Single Part Machines in India | JAL Automation & Systems Pune Maharashtra India.

Single Part Machines manufacturer, Single Part Machines manufacturer in India, Single Part Machines supplier, Single Part Machines supplier in India.

RTV SILICON DISPENSING GUN

Backed by a rich industrial experience, we are engaged in offering an industry proven manual\pneumatic dispensing gun. Manual pneumatic dispenser for 300CC Cartages and 600CC Cartages squeeze tubes. Cartage Dispensers are ergonomically designed for hand delivery of sealants. This pneumatically operated dispensing system is designed for simple, clean, hand held dispensing of products.

Features

  • Reliable
  • Industry proven designs
  • Fine quality
  • Compact in size
  • Lower cost and better delivery
  • Integrated pressure regulator with gauge.
  • Quick pressure relief, to minimize run-on effect

Specifications

  • Cartridge capacity:600cc Cartridge
  • Cartridge capacity: 300 & 600CC Cartridge
  • Operating pressure: 1-6 kg\cm2
  • Operation Modes: Manual\Pneumatic

Application

  • PCB & battery terminal & Connectors, Wire Harness & Groove

RTV SILICON SELANT DISPENSER

The RTV Silicon Sealant Dispenser is a semiautomatic dispensing system designed to provide precision dispensing of RTV Silicon adhesive or other materials. It is capable of handling viscosity ranging from liquids to pastes. All contact components are constructed of inert materials to allow dispensing of the mostly high viscous grease and paste.

Features

  • Manual, Timer, or Cycle Operation Modes.
  • Proximity or Foot Switch Controlled.
  • Programmable Timer 0.01 – 99.99 seconds
  • Suck-Back feature ensures no dripping through vacuum.

Specifications

  • Cartage Capacity :- 300 CC & 600 CC Cartage
  • Opeation Prssure: 1 to 6 kg\cm
  • Operation Modes: Manual\Pneumatic

Application

  • PCB Terminal & Connectors, Wire Harness & groovements, LED Lamps, LED Drivers PCB, etc.

RTV SILICON DISPENSING WITH ROBOT


a) Robotic table top Unit

• RTV Silicon Dispensers are portion controlled and are designed to dispense accurate amount of product. These dispensers use a robot to dispense material on irregular profiles.
• These RTV Silicon Dispensers with robot can be configured to pre-set value, commonly used quantities or to custom quantities specified by end user. Process selections can be made using buttons on the front panel.

Features

  • Material capacity – 300 cc cartridge (Custom as per requirement)
  • Material Loading – manual
  • Operating pressure – 5-6 Kg/cm2
  • Controller – PLC & Timer

Specifications

  • Material Capacity: 300 CC, 600 CC & 2600 CC Cartage (Custom as per requirement)
  • Material Loading: Manual
  • Operation pressure: 4-7 kg\cm2
  • Controller: PLC & Timer

Application

  • Automotive Engine Gasket Application, Microdot Adhesive Application, UV Adhesive Dispensing on camera module, Electronics PCB & LCD, Sealants Dispensing on Pressure sensor parts, etc.

b) Robotic Dispensing Machine

Features

  • Material capacity – 300 cc cartridge (Custom as per requirement)
  • Material Loading – manual
  • Operating pressure – 5-6 Kg/cm2
  • Controller – PLC & Timer

Specifications

  • Material Capacity: 300 CC, 600 CC & 2600 CC Cartage (Custom as per requirement)
  • Material Loading: Manual
  • Operation pressure: 4-7 kg\cm2
  • Controller: PLC & Timer

Application

  • Automotive Engine Gasket Application, Microdot Adhesive Application, UV Adhesive Dispensing on camera module, Electronics PCB & LCD, Sealants Dispensing on Pressure sensor parts, etc.

c) Robotic X-Y Slide Dispensing Machine

Features

  • Material capacity – 300 cc cartridge (Custom as per requirement)
  • Material Loading – manual
  • Operating pressure – 5-6 Kg/cm2
  • Controller – PLC & Timer

Specifications

  • Material Capacity: 300 CC, 600 CC & 2600 CC Cartage (Custom as per requirement)
  • Material Loading: Manual
  • Operation pressure: 4-7 kg\cm2
  • Controller: Std. Robot controller (Controlling X-Y-Z Slide)

Application

  • Automotive Engine Gasket Application, Microdot Adhesive Application, UV Adhesive Dispensing on camera module, Electronics PCB & LCD, Sealants Dispensing on Pressure sensor parts, etc.

LED GLUE DISPENSING MACHINE

• LED Glue Dispensing Machine is a semiautomatic dispensing system designed to provide precision dispensing of adhesives or other materials. It is capable of handling viscosity ranging from liquids to pastes. All contact components are constructed of inert materials to allow dispensing of the most aggressive Adhesives, Rubber Glue, low viscous grease and Oils.
• LED Glue Dispensing Machine includes a control box, housing the timer, one pressure gauge and regulator, a Mini dispensing valve, a valve stand and a pressure reservoir. A foot switch, as well as all hoses and connections are also included.
• The system is operated by programmable digital timer with six modes of operation, including both up and down timing. The large LCD display offers time ranges from 0.01 seconds to 9999 hours with repeat accuracy of + -0.2%



Features

  • Automatic glue dispensing with rotary indexer
  • Continuous (Line) & intermingle (Dot) dispensing
  • Production rate of 240 components/hr
  • Compact in size
  • Dispenses Adhesives, Rubber Glue, low viscous grease and Oils
  • Digital timer Offers time range 0.01 seconds to 9999 hours
  • Reservoirs allow drop and load refill with standard adhesive containers
  • Precise dispensing of adhesives or other material with viscosities ranging from liquid-to paste

Specifications

  • Material Capacity: 300 CC, 600 CC & 2600 CC Cartage (Custom as per requirement)
  • Material Loading: Manual
  • Operating Pressure: 4-7 kg\cm2
  • Controller: PLC & Timers
  • Electronics Timer: Digital, 6 different timing functions and 11 timing ranges from 0.01seconds to 9999 hrs. Features up or Down counting.
  • Air Pressure: 4-7 kg\cm2, fully Adjustable.

Application

  • LED Lamps, Buzzer, oil View glass cap, etc.

ADHESIVE DUCT DISPENSER

• Adhesive duct dispenser is designed to dispense high viscous liquids & pastes. This machine includes a side console to display exact product position and enables dispensing the specified amount of glue on the product at specified location.
• These Dispenser are designed considering the ergonomic and conditions, making it easy to use and easy to clean.


Features

  • Controlled manner semi-automatic dispenser.
  • Simple to use and easy to clean.
  • Clean dispense – quick cut off avoids Messy spills.
  • Easy to move machine with pre-installed castor wheel.
  • Continuous and controlled calibrated temperature Display.
  • Stainless steel vessels and equipped with job work table.
  • Standard High-pressure safety valve and calibrated gauges.
  • Designed with ergonomics and aesthetic considerations.

Specifications

  • Loading: Manually
  • Electric: 230 VAC, 50-60 Hz
  • Controller: PLC and HMI with rely control
  • Operating Tank Capacity: 5 Ltr
  • Number of Dispensing Head: m 2
  • Material Pressure: 4-7 kg\cm2 (max)

Application

  • Air filter duct, Rubber groove met etc.

ADHESIVE HANDLE GRIP DISPENSER

• Adhesive is designed to dispense high viscous liquids & pastes. This machine includes a side console to display exact product position and enables dispensing the specified amount of glue on the product at specified location.
• These Dispenser are designed considering the ergonomic and conditions, making it easy to use and easy to clean.

Features

  • Controlled manner semi-automatic dispenser.
  • Simple to use and easy to clean.
  • Clean dispense – quick cut off avoids Messy spills.
  • Easy to move machine with pre-installed castor wheel.
  • Continuous and controlled calibrated temperature Display.
  • Stainless steel vessels and equipped with job work table.
  • Standard High-pressure safety valve and calibrated gauges.
  • Designed with ergonomics and aesthetic considerations.

Specifications

  • Loading: Manually
  • Electric: 230 VAC, 50-60 Hz
  • Controller: PLC and HMI with rely control
  • Operating Tank Capacity: 5 Ltr
  • Number of Dispensing Head: m 2
  • Material Pressure: 4-7 kg\cm2 (max

GREASE DISPENSING MACHINE

Grease dispensing machines are designed for dispensing high viscosity greases and oil with accuracy and precision. These dispensers are suitable for small shots and beads of high viscosity greases. Its compact size and easy to use design make dispensing efficient.


a) Grease Unit

Features

  • Non dripping dispensing valve
  • Compact in size
  • Sturdy.
  • Long lasting.
  • Specifically Designed

Specifications

  • Tank Size: 1 Ltr (as per Requirement)
  • Material Loading: Manual
  • Operating by foot switch
  • Operating Pressure: 4-7 k\cm2
  • Controller: PLC & Timers

Application

  • Put Grease on Miniature bearing, Bearing hub, oil seals, Electronic Automotive Switches, Wiper Motor Gearbox, Globe box & Car power window Gearbox Assembly.

b) Grease Dispensing Machine With Rotary Table

Features

  • Automatic dispensing unit with manual material loading
  • Exact volumetric dispensing of grease
  • Non dripping dispensing valve
  • Compact in size
  • Sturdy.
  • Long lasting.
  • Specifically Designed

Specifications

  • Tank Size: Customized (as per Requirement)
  • Material Loading: Manual
  • Operating Pressure: 4-7 k\cm2
  • Controller: PLC & Timers

Application

  • Put Grease on Miniature bearing, Bearing hub, oil seals, Electronic Automotive Switches, Wiper Motor Gearbox, Globe box & Car power window Gearbox Assembly.

c) High Pressure Grease Dispensing Machine


Features

  • Automatic dispensing unit with manual material loading
  • Exact volumetric dispensing of grease
  • Non dripping dispensing valve
  • Sturdy.
  • Long lasting.
  • Specifically Designed

Specifications

  • Grease Feeder Unit Size: Customized (as per requirement)
  • Material Loading: Manual
  • Operating Pressure: 0-400 bar
  • Controller: PLC, Scada & Timers, Pressure gauge, flow meter, pressure transmitter

Application

  • Put Grease on Miniature bearing, Bearing hub, oil seals, Electronic Automotive Switches, Wiper Motor Gearbox, Globe box & Car power window Gearbox Assembly

d) Automatic Grease Dispensing Machine For Bearing Industries


Features

  • Automatic dispensing unit with manual material loading
  • Exact volumetric dispensing of grease
  • Non dripping dispensing valve
  • Compact in size
  • Sturdy.
  • Long lasting.
  • Specifically Designed

Specifications

  • Tank Size: Customized (as per Requirement)
  • Material Loading: Manual
  • Operating Pressure: 4-7 k\cm2
  • Controller: PLC & Timers

Application

  • Put Grease on Miniature bearing, Bearing hub, oil seals, Electronic Automotive Switches, Wiper Motor Gearbox, Globe box & Car power window Gearbox Assembly.

DIGITAL ALPHA DISPENSER

The digital Alpha Dispenser is the latest addition to bench top automatic dispensers. The Alfa has a bright LCD screen and 10 memory locations to automatically cycle though up to 10 self-taught programs.

Features

  • Manual, Timer, or Cycle Operation Modes.
  • Foot Pedal, Proximity or Foot Switch Controlled.
  • Programmable Timer 0.01 seconds-9999hrs.
  • No unwanted dripping thanks to a regulated vacuum that keeps low-viscosity products in small cartridges.
  • Flexible syringe in digital & analogy pressure gauge.

Specifications

  • Size: 270 x 200x 85 mm
  • Dispense time: Manual, Timed, Cycle
  • Internal Memory: Yes
  • Voltage: 220 VAC. 50-60 Hz
  • Air pressure: 4-7 kg\cm2

Application

  • Epoxy Doming, Painting, Jewellery, Doming sticker, Handmade Mehndi, Dental, Electronics parts like PCB, Solder paste, SMT glue etc.

LIQUID GLUE DISPENSER

The digital Alpha Dispenser is the latest addition to bench top automatic dispensers. The Alfa has a bright LCD screen and 10 memory locations to automatically cycle though up to 10 self-taught programs.


Features

  • Manual, Timer, or Cycle Operation Modes.
  • Foot Pedal, Proximity or Foot Switch Controlled.
  • Programmable Timer 0.01 seconds-9999hrs.
  • No unwanted dripping thanks to a regulated vacuum that keeps low-viscosity products in small cartridges.
  • Flexible syringe in digital & analogy pressure gauge.

Specifications

  • Size: 270 x 200x 85 mm
  • Dispense time: Manual, Timed, Cycle
  • Internal Memory: Yes
  • Voltage: 220 VAC. 50-60 Hz
  • Air pressure: 4-7 kg\cm2

Application

  • Dental, Electronics parts like PCB, Solder paste, SMT glue etc.

ROTARY TABLE DISPENSER

Rotary table dispensers include automated round bonding with one / two turntables. This system is a perfect solution for audio speaker magnet, automotive magneto assembly, stator motor yoke, breaks shoe, automotive round Head lamp reflector with glass and LED lamp reflector with glass bonding applications.


Features

  • Heavy Duty construction of base, hoist, upper head, and bearing housing.
  • Adjustable arrangement available to hold drum / bowl in place.
  • Lift manually or pneumatic operated cylinders.
  • Available in Tank Mounted, Thru-Floor, or Portable Mix Bowl designs.
  • Standard configurations or combinations of blades available.
  • Standard models are available in sizes from 1/8 HP to 1 HP, with specially designed models

Specifications

  • Cartage Capacity: 300 CC, 600 CC & 2600 CC Cartage (Custom as per requirement)
  • Electrical: 230 VAC, 50-60 Hz.
  • Over all Dimensions of the gun: diameter 50 mm and 425

Application

  • Audio Speaker magnet, automotive magneto assembly, stator motor yoke, breaks shoe, automotive round head lamp reflector with glass and LED Lamp reflector with glass bonding applications, Electric buzzer, electric horn, Automotive engine parts & hub assembly etc.

ANAEROBIC ADHESIVE DISPENSING MACHINE

• Anaerobic adhesive dispenser is a semiautomatic dispensing system designed to provide precision dispensing of adhesives or other materials. It is capable of handling viscosities ranging from liquids to pastes. All contact components are constructed of inert materials to allow dispensing of the most aggressive Adhesives, Rubber Glue, low viscous grease and Oils.
• Anaerobic Adhesive Dispenser includes a control box, housing the timer, one pressure gauge, regulator, a Mini dispensing valve, a valve stands and a pressure reservoir. A foot switch, as well as all hoses and connections are also included. The system is operated by programmable digital timer with six modes of operation, including both up and down timing. The large LCD display offers time ranges from 0.01 seconds to 9999 hours with repeat accuracy of + -0.2%


Features

  • Precise dispense-control of low viscosity materials using dispensing valves.
  • Easy refill with easy opening SS reservoir tanks.
  • Large, clearly marked air pressure and vacuum control knobs.
  • Dispenses the Adhesives, Rubber Glue, low viscous grease and Oils.
  • Digital timer offers time ranges from 0.01 seconds to 9999 hours.
  • Reservoirs allow drop and load refill with standard adhesive containers.
  • Precise dispensing of adhesives or other material with viscosity ranging.

Specifications

  • Electrical: 230 VAC, 50-6 Hz.
  • Air Pressure (max): 5 to 7 kg\cm2
  • Dispense Valve working pressure: 4 to 7 kg\cm2
  • Standard bottles: 250 ml
  • Electronics Timer: Digital, 6 different timing.
  • Functions and 11 timing ranges from 0.01 second to 9999 hours.
  • Features up or down counting Air Pressure: 0 to 7 kg\cm2.
  • Fully adjustable.
  • Weight:7 kg
  • Reservoir cap from liquid-to-paste.

Application

  • Filters plate, Lights Display, AC, Fasteners, Cockpit doors etc.

OIL FILTER PAPER RUBBER ADHESIVE DISPENSING MACHINE

The Oil filter paper rubber Adhesive Dispensing is a semiautomatic dispensing system designed to provide precision dispensing of oil filter paper rubber adhesive or other materials. It is capable of handling viscosity ranging from liquid to pastes. All contact components are constructed of inert materials to allow dispensing of the highest viscous grease and paste


Features

  • Controlled manner semi-automatic dispenser.
  • Simple to use and easy to clean.
  • Clean dispense- quick cut-off avoids.
  • Messy Spills.
  • Glue Heating.
  • Continuous and controlled calibrated timer Display.
  • S.S material Tank.
  • Standard high-pressure safety valve and calibrated gauges.
  • Designed with ergonomics and aesthetic considerations.

Specifications

  • Material capacity: 2L
  • Number of Dispensing Station: 2
  • Material Loading: Manual Loading
  • Controller: PLC, HMI and Pressure based
  • Operating Pressure: 4-7 Kg\cm2 (max)
  • Weight (Empty0: 100-120kg (approx.)

Application

  • Binding of Various filter paper, paper industries, etc.

RESERVOIR TANKS

Reservoirs are used to feed bulk fluids to a valve or dispenser. Reservoir tanks are available in variety of sizes (0.5 Ltr. to 200 Ltr.) and can be custom designed as per customer requirement. Various types on reservoirs tanks including bottom porting for very high viscosity liquids and top porting for low to medium viscosity. An “open top” style is used if liners are required to prevent the material from making contact with the sides of the container or if the fluid requires an agitator.



Features

  • Durable finish standards.
  • Easy to fit
  • High Strength
  • Customized specification.
  • Top quality
  • Health with stirrer arrangement.
  • Low- & high-level sensor output.

Application

  • A Reservoir is a storage space for fluids. These fluids may be water, oil, any type of liquid & adhesive etc.